t he ultimate in a 30 degree rotation, single deck rotary switch, a subminiature precision rotary selector switch, the series 1150 is 0.320 inches in diameter and rated at 25,000 operational cycles. it has been engineered to meet all applicable requirements of mil-s-3786. the basic series 1150 is available as a 1 pole, 2-10 position or a 2 pole, 2-5 position switch. it is a non-shorting switch with 36 degree indexing. it has pc terminals and shaft seals for contaminant free operation. the series 1150 is well suited for avionics, communications, test equipment and command and control applications where space is at a premium and tough environmental reliability requirements are necessary. quality construction, including materials that meet the strictest standards, allows these subminiature switches to combine superior current switching capabilities with constant low contact resistance. exceedingly stringent manufacturing processes, inspection and testing requirements ensure long life and high reliability. the a1150 and b1150 are designed for the addition of a panel seal. these switches are perfect for miniature switch applications where contamination control is a must and harsh environments are expected. they are ideal when long life and precision in extreme conditions are necessary. the a1150 uses the same body as the standard 1150 but with a smaller shaft and ferrule to allow a panel seal. the b1150 uses the standard 1150 shaft and ferrule sizes with a larger body diameter to allow a panel seal. 1150 series subminiature enclosed precision rotary switch iso9001 certified
1150 series 1150 series subminiature enclosed precision rotary switch 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 1150 series/page 2 1150 no panel seal (see page 3) 1150 screwdriver for no panel seal, a & b versions a1150 smaller ferrule (see page 4) b1150 larger body diameter (see page 5) notes: 1150 - .125 shaft dia., .250 ferrule dia., .320 body dia., no panel seal, (see page 3) a1150 - .100 shaft dia., 10-32 ferrule dia. (.189 ferrule dia.), .320 body dia., panel seal, (see page 4). b1150 - .125 shaft dia., .250 ferrule dia., .375 body dia., panel seal, (see page 5).
1150 series 1150 series subminiature enclosed precision rotary switch 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 1150 series/page 3 11 36- 1 04 **** notes: 1. dimensions are in inches. 2. unless otherwise specifed, tolerances are .005 and 3 on angles (non-accumulative). 4. the screw-driver slotted shaft dimensions are indicated; all other remains the same. the slot in the shaft lines up with the point of contact of pole number one. 5. switch is available with non-shorting contact only. 6. see page 6 for circuit diagram and all typical features. alphabetical designation for options number of positions number of poles degrees between positions cole basic switch number ordering information sample code options the following options can be added to the standard switch. when ordering, simply add the letter after the basic part number. f =fixed stop between the frst and last position on the 10 position switch p = seal (shaft only) sd = screwdriver slot s = shorting (not available) 1150 - no panel seal two pole see page 6 for detail
1150 series 1150 series subminiature enclosed precision rotary switch 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 1150 series/page 4 notes: 1. dimensions are in inches. 2. unless otherwise specifed, tolerances are .005 and 3 on angles (non-accumulative). 4. the screw-driver slotted shaft dimensions are indicated; all other remains the same. the slot in the shaft lines up with the point of contact of pole number one. 5. switch is available with non-shorting contact only. 6. see page 6 for circuit diagram and all typical features. ordering information sample code the 1150 series without options if furnished with pc termination, non-shorting and without shaft and panel seals. the standard 10 positions switch is continuous rotation. options the following options can be added to the standard switch. when ordering, simply add the letter after the basic part number. f = fixed stop between the frst and last position on the 10 position switch p = seal (shaft and panel) sd = screwdriver slot s = shorting (not available) a1150 - smaller ferrule two pole see page 6 for detail
1150 series 1150 series subminiature enclosed precision rotary switch 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 1150 series/page 5 notes: 1. dimensions are in inches. 2. unless otherwise specifed, tolerances are .005 and 3 on angles (non-accumulative). 4. the screw-driver slotted shaft dimensions are indicated; all other remains the same. the slot in the shaft lines up with the point of contact of pole number one. 5. switch is available with non-shorting contact only. 6. see page 6 for circuit diagram and all typical features. ordering information sample code the 1150 series without options if furnished with pc termination, non-shorting and without shaft and panel seals. the standard 10 positions switch is continuous rotation. options the following options can be added to the standard switch. when ordering, simply add the letter after the basic part number. f = fixed stop between the frst and last position on the 10 position switch p = seal (shaft and panel) sd = screwdriver slot s = shorting (not available) b1150 - larger body diameter
1150 series 1150 series subminiature enclosed precision rotary switch 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 1150 series/page 6 rear view for solder lug & pc. terminal non-turn washer ferrule .250 dia. only printed circuit terminal detail schematics diagrams (viewed from shaft end and shown in position #1) 36 angle of throw recommended panel cutout .250 dia. ferrule recommended panel cutout 10-32 ferrule (when using non-turn washer) notes: 1. dimensions are in inches. 2. unless otherwise specifed, tolerances are .010 and 3 on angles (non-accumulative). 3. position 1 and terminal 1 coincide. 4. dimension shown are typical for all angles of throw unless otherwise specif ed. one pole two pole one pole two pole typical features
1150 series 1150 series subminiature enclosed precision rotary switch 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 2650 south croddy way p.o. box 25063 santa ana, california 92799-5063 usa phone 714.556.3100 sales fax 714.241.9061 www.cole-switches.com iso9001 certified 1150 series/page 7
|
